Sit Happens

I decided to move forward on the Suzuki last week. I need to get a seat installed before it will be safe enough for the guys at the dealer to ride it, and that's a pre-requisite for them to be able to tune it.

So I called Richs Custom Seats. Explained that I'd need a new pan and a new seat. I got the "bring the bike down and we can figure it out" response I expected. I made an appointment for Saturday.

I figured the process would look something like...

1. Bring the bike down Saturday morning.
2. Spend 15-30 minutes talking over what I wanted, what was possible, and deciding on a plan. Leave the bike behind.
3. Come back a week or two later (once the pan was done) to do the foam fitting. Take the bike.
4. Come back a week or two later to pick up the completed seat and sign over my first born son as payment.

Instead the process was...

1. Bring the bike in 10:45am Saturday.
2. Spend 15 minutes talking about what I wanted and what could be done with what I had.
3. Hang in the shop talking motorcycles with Rich, his employees, and a number of other customers (most of whom we're also a little surprised by Richs process).
4. About a dozen times get asked by Rich to verify that the shape / style / fit of the seat was what I expected.
5. Leave about 6:00pm with the bike and the finished seat.

Yeah, it cost me the day but now I have the seat done instead of waiting until the end of the month. Plus it only cost about 60% of what I expected. (Partly because they were able to modify my existing seatpan instead of having to create a new one from scratch.)

Next time I'll just have to remember to bring a book.




If you look close at the picture from the right side you'll also see the other little change I had to make. I had to move the rear brake reservoir to keep it from touching the exhaust. One of my finer successes: I spent 45 minutes and about $0.89 to make the bracket.